Plastic Geogrids Description:
Biaxial geogrids are made of macromolecule polymer by the process of being stretched out, formed into lamella, punched regularly and then longitudinal and transverse elongated. They have much higher longitudinal and transversetensile strength.
These structures can supply alinking system to soil, which be used broadly to enable the permanent bearing capacity of roadbed.
Plastic Geogrids Functions:
Strengthen the load capacity of roadbed or land base and extend the lifetime;
Prevent road surface and foundation from sinking or flawing, keep clean and beautiful ground surface.
Building convenience, save time and labour, shorten the time limit of project and reduce the charges of maintenance;
Can keep the culvert away from the crack;
Strengthen the land slope, keep the land away from running off.
Reduce the thickness of cushion, reduce the cost;
Support the grass to stability for land slope
|PP Biaxial Plastic Geogrids|
|Longitudinal Yield Strength,kN/m||15||20||25||30||40||45||50|
|Crosswise Yield Strength,kN/m||15||20||25||30||40||45||50|
|Longitudinal Yield Elongation,%||15|
|Crosswise Yield Elongation,%||13|
|Longitudinal Yield Strength at 2% Elongation,kN/m||5||7||9||10.5||14||16||17.5|
|Crosswise Yield Strength at 2% Elongation,kN/m||5||7||9||10.5||14||16||17.5|
|Longitudinal Yield Strength at 5% Elongation,kN/m||7||14||17||21||28||32||35|
|Crosswise Yield Strength at 5% Elongation,kN/m||7||14||17||21||28||32||35|
|Product width, m||4|